Bonded Seal Washers

Bonded seal washers seal bolts and stop leaks at hydraulic fittings, pipe joints and valve bodies. Each one is a metal washer with an elastomeric ring held securely inside its diameter. The metal limits deformation and the elastomeric ring helps prevent over-compression. They are used where a standard washer won't give a strong enough seal.

• Construction: metal washer with a bonded elastomeric inner ring
• Pressure: seals reliably at both high and low-pressure points
• Low bolt torque: makes fitting easier, limits handling damage and gives higher performance
• Temperature: resists a wide range of temperatures

Available sizes:

• M10 x 16 x 1.5mm (Pack of 50)
• M14 x 21 x 1.5mm (Pack of 50)
• M16 x 26 × 1.5mm (Pack of 50)
• M16.7 X 24 X 1.5mm (Pack of 25)
• M18 x 26.0mm x 1.5mm (Pack of 50)
• M20 x 28 x 1.5mm (Pack of 50)
• M22 x 30 x 1.5mm (Pack of 50)
• M24 x 32 x 1.5mm (Pack of 50)
• M10 x 16 x 2mm (1/8" BSP) (Pack of 50)
• M14 x 21 x 2mm (1/4" BSP) (Pack of 50)
• M17 x 24.0 x 2.5mm (3/8" BSP) (Pack of 50)
• M22 x 28 x 2.5mm (1/2" BSP) (Pack of 50)
• M24 × 32 x 2.5mm (5/8" BSP) (Pack of 25)
• M28 × 35 x 2.5mm (3/4" BSP) (Pack of 25)
• M33 × 42.0 x 2.5mm (1" BSP) (Pack of 25)
• M18.7 x 26 x 20mm (Pack of 25)